Weather-protected bulk transport
Covered Hopper Wagons for Dry Bulk Cargo
Railway covered hoppers for grain, cement, lime, fly ash and other materials that require protection from rain, snow, wind and direct exposure.

6 established configurations
69–80 t published loading capacity
Covered hopper wagon supply
Covered Hoppers for Sale
The original page content is retained and reorganized for faster product comparison and project discussion.
Covered hoppers are railway freight hopper wagons with roofs, intended for dry bulk materials that need closed storage conditions.
The protective cover helps shield sand, clay, cement powders, grain and similar cargo from rain, snow, wind and sunshine.
AGICO supplies covered hoppers worldwide and supports project-specific wagon design for different railway gauges and operating requirements.
Model comparison
Select the Required Cargo Configuration
Compare the four published standard-gauge models before reviewing export configurations.

Grain transport
70T 4-Axle Railway Grain Hopper Wagon
- Loading capacity: 69 t
- Tare weight: 24.8 t
- Axle load: 23 t/axle
- Loading Volume: 98 m3
- Overall length: 16466 mm
- Overall width: 3344 mm
- Overall height: 4195 mm
- Gauge: 1435 mm
- Max speed (full load): 120 km/h
- Minimum radius of curvature negotiable: 145 m

Lime transport
KM70G 4-Axle Covered Lime Hopper
- Loading capacity: 74 t
- Tare weight: 26 t
- Axle load: 25 t/axle
- Loading Volume: 82 m3
- Overall length: 14400 mm
- Overall width: 3200 mm
- Overall height: 4230 mm
- Gauge: 1435 mm
- Max speed (full load): 120 km/h
- Minimum radius of curvature negotiable: 145 m

Fly ash transport
KH70 4-Axle Fly Ash Covered Hopper
- Loading capacity: 70 t
- Tare weight: 27.9 t
- Axle load: 25 t/axle
- Loading Volume: 75 m3
- Overall length: 14400 mm
- Overall width: 3200 mm
- Overall height: 4058 mm
- Gauge: 1435 mm
- Max speed (full load): 80 km/h
- Minimum radius of curvature negotiable: 145 m

Flexible roof
KH70B 4-Axle Flexible Roof Covered Hopper
- Loading capacity: 70 t
- Tare weight: 26.6 t
- Axle load: 25 t/axle
- Loading Volume: 75 m3
- Overall length: 14400 mm
- Overall width: 3300 mm
- Overall height: 4465 mm
- Gauge: 1435 mm
- Max speed (full load): 80 km/h
- Minimum radius of curvature negotiable: 145 m
Selection guide
Match Protection and Capacity to the Cargo
Cargo properties, moisture limits, loading equipment, discharge arrangement and route restrictions determine the appropriate covered hopper configuration.
| Decision | Typical requirement | Relevant configuration |
|---|---|---|
| Cargo type | Grain and food-contact material | Grain hopper |
| Moisture protection | Lime, cement or fly ash | Closed roof and loading hatch |
| Loading access | Variable loading interface | Flexible-roof hopper |
| Route interface | Gauge, axle load and envelope | Project-specific design |
Export project references
Our Covered Hoppers Around the Globe
Two project configurations retained from the original page demonstrate different gauges, volumes and loading arrangements.

1520 mm gauge
1520MM Gauge Grain Hopper Wagon for Ukraine
- Loading capacity: 70 t
- Tare weight: 24 t
- Axle load: 25 t/axle
- Loading Volume: 104 m3
- Overall length: 14720 mm
- Maximum width: 3260 mm
- Maximum height (empty load): 4800 mm
- Gauge: 1520 mm
- Loading hatch Qty: 4
- Unloading hatch Qty: 6
- Height from unloading hatch to rail surface: 350 mm
- Distance between bogie centers: 10500 mm
- Distance between coupler centerline and rail surface: 1060 ± 20 mm
- Max speed (full load): 120 km/h

1600 / 1435 mm gauge
6-Axle Grain Hopper Designed for Australia
- Loading capacity: 80 t
- Tare weight: 38.5 t
- Axle load: 23 t/axle
- Loading Volume: 126 m3
- Specific volume: 1.575 m3/t
- Overall length: 20407 mm
- Gauge: 1600/1435 mm
- Empty / fully loaded vehicle braking rate: 4.5
- Height from unloading hatch to rail surface: 350 mm
- Distance between bogie centers: 14377 mm
- Bogie weight: 7 t
- Coupler height: 890 mm
- Max speed (full load): 115 km/h
- Fixed wheelbase: 1524×2 mm
- Wheel diameter: 840 mm
The 6-axle design can operate as a grain hopper wagon or a 60-foot container flat wagon. Its grain hopper box has two large and one small hopper bins for grain with different bulk densities. T4003 stainless steel material is used for all food-contact parts, including the sidewall, end wall, hopper, bottom door, end door and roof. The large and small rain-proof movable roof sections can be opened separately or together.
Discuss Your Covered Hopper Requirement
Share the cargo, loading and discharge interfaces, gauge, axle load, operating speed and route envelope.