Heavy-duty industrial shunting
ZTYS1400 Dual Power Diesel Shunting Locomotive
A 1,400 hp diesel-hydraulic locomotive engineered for intensive yard work, high starting effort and flexible single- or twin-power operation.

Built for variable duty cycles
Run one power unit for lighter movements or engage both units when heavier consists demand maximum performance.
1,400 hpInstalled power
300 kNStarting tractive effort
5,184 tReference trailing load
70 mMinimum curve radius
Advantages
Designed around real shunting demands
01
Selectable power
Independent engines let the crew adapt output to changing tonnage and duty intensity without sacrificing twin-unit capability.
02
High low-speed effort
Up to 300 kN starting and 243 kN continuous tractive effort support controlled starts with heavy industrial consists.
03
Yard-ready geometry
B-B bogies, a 7,500 mm bogie-center distance and 70 m minimum curve radius suit dense industrial track plans.
04
Operator awareness
PLC control and cameras at both ends improve visibility during reversing, coupling and movements through busy work areas.
Dual power system
Two power packs, one flexible locomotive
Each 515 kW engine drives through the diesel-hydraulic transmission to its associated bogie. The mirrored arrangement distributes power across the locomotive and gives fleet managers a practical operating choice: economical single-unit running for lighter work, or simultaneous twin-unit output when a heavy cut must be started and controlled.
The modular arrangement also supports maintenance planning because the two power groups are functionally independent. Actual operating strategy should be matched to train mass, gradient, rail condition, braking requirements and local rules.

Technical parameters
ZTYS1400 locomotive specifications
| Installed power | 2 × 515 kW at 2,100 rpm (1,400 hp total) |
|---|---|
| Transmission | Diesel-hydraulic |
| Axle arrangement / track gauge | B-B / 1,435 mm |
| Maximum starting tractive effort | 300 kN |
| Continuous tractive effort | 243 kN |
| Reference trailing load, straight and level | 5,184 t dual-power / 2,728 t single-power |
| Maximum / continuous speed | 21 km/h / 8 km/h |
| Minimum curve radius | 70 m |
| Wheel diameter / wheelbase | 1,050 mm / 2,100 mm |
| Bogie center distance | 7,500 mm |
| Service weight | Approximately 94 t |
| Overall dimensions | 14,790 × 3,100 × 4,465 mm |
| Coupler | No. 13 top-operated swing coupler; center height 880 ± 10 mm |
| Braking and control | Air brake, unit parking brake, PLC control, front/rear cameras |
Trailing-load figures are reference values for straight, level track. Final capability depends on gradient, curvature, adhesion, wagon resistance, braking configuration and operating regulations. AGICO Group can review project conditions during technical selection.


Application scenarios
Where the ZTYS1400 works best
Its combination of high starting effort, moderate speed and compact curve performance is tailored to private industrial networks rather than high-speed service. The locomotive can handle repeated wagon positioning, transfer moves and heavy starts across a range of demanding sites.
Steel and metal processing plants
Ports, bulk terminals and logistics yards
Mines, quarries and mineral facilities
Factories, depots and workshop networks
Application planning
Match the locomotive to the duty
For buyers, the dual-power arrangement allows one locomotive to cover a broad working envelope. Light repositioning, wagon collection and workshop transfers do not always require full installed power, while loaded rakes leaving a process area may demand both units. This operating choice can simplify fleet planning, provided that the final configuration is evaluated against real site conditions.
AGICO Group reviews the heaviest trailing load, ruling gradient, tightest curve, rail condition, daily cycles, ambient environment, braking practice and interface requirements. Common assignments include pulling wagons from loading points, pushing cuts into unloading positions, feeding production lines and assembling trains for interchange. The 21 km/h maximum speed keeps the ZTYS1400 focused on controlled industrial movement, while its 8 km/h continuous rating supports sustained low-speed traction. A duty-based review identifies whether the quoted reference performance is appropriate and whether project-specific engineering is needed before manufacture.
Discuss your shunting duty with AGICO Group
Share your trailing load, gradient, curve radius, operating cycle and coupling requirements. Our team will help evaluate a suitable locomotive configuration for your industrial railway.
